A division of Accumar Marine Services
Integrate. Automate. Sustain.
The essential vessel systems between the engine room and the living spaces.
Watermakers, pumps, plumbing, shore-service equipment, Glendinning products, and multi-system integration organized for maintainability and long-term reliability.
Real Accumar field work: installed water-production equipment and supporting plumbing aboard a vessel.
Water
Production and distribution
Pumps
Flow and pressure
Glendinning
Cable and control systems
Integrated
Refit coordination
Division scope
Every service below remains part of Accumar Marine Services. The division structure makes expertise easier to find while preserving one company, one service standard, and one point of accountability.
Selection, installation, membranes, pumps, controls, preservation, commissioning, and service.
Explore service
Installation and service for Cablemaster shore-power cable systems, Complete Controls electronic engine controls, Automatic Synchronizers, Hosemaster, and ProPilot systems.
Explore serviceFreshwater, raw-water, circulation, bilge, transfer, and specialty pump troubleshooting and replacement.
Explore service
Freshwater pressure, raw-water strainers, tanks, valves, sanitation, water heating, fittings, and leak diagnosis.
Explore serviceSystem briefs, equipment selection, integration planning, refit sequencing, and owner representation.
Explore serviceUse guided tools to narrow watermaker and pump options before a technical review.
Explore serviceTechnical capabilities
Brand familiarity
We work across established marine manufacturers, coordinate factory support where available, and evaluate the complete system before recommending equipment.
Manufacturer names and logos belong to their respective owners. Dealer or service authorization applies only where specifically stated on this page.
Mobile division service across Southwest Florida:
Systems matrix
AMS Systems connects water production, pumps, plumbing, shore-service handling, Glendinning controls, access, power, drainage, preservation, and maintainability into one coordinated scope.
Water production selected and maintained around crew demand, operating area, power, tankage, and preservation.
Flow, pressure, storage, drainage, and sanitation systems traced from intake to final endpoint.
Cable-handling and propulsion-control products supported within one coordinated installation and service scope.
Equipment, access, power, plumbing, controls, protection, service clearances, and commissioning planned together.
How the division works
The process follows the complete vessel system—not a single component in isolation. That reduces unnecessary parts replacement and creates a cleaner service record for the next decision.
Capacity, duty cycle, water quality, available power, space, access, noise, serviceability, controls, and connected equipment define the correct system scope.
Intakes, strainers, pumps, treatment, tanks, valves, hoses, controls, wiring, drains, discharge, and user endpoints are evaluated together.
Components are selected and arranged for performance, access, maintainability, protection, controls, and compatibility with the vessel’s other systems.
Output, pressure, current, leaks, controls, alarms, flushing, preservation, and owner/crew operation are checked and documented.
Field evidence
Project images are shown with factual captions so owners, captains, engineers, and yards can understand the type of work behind the service claim.
Water-production controls, flow meters, pressure gauges, prefiltration, valves, and supporting plumbing shown as one installed system.
View related serviceTwo Glendinning cable-handling units installed together for organized shore-power cable deployment and retrieval.
View related service
Retrieval drums, cable bins, mounting hardware, and surrounding access visible inside the vessel machinery space.
View related serviceInstalled digital controller supporting an onboard seawater-strainer system and its operating display.
View related serviceGuides and next steps
Use a focused service page, project example, planning tool, or service request instead of searching through a generic list.
Selection, installation, membranes, filters, pumps, controls, preservation, commissioning, and service.
Open resourceCableMaster, HoseMaster, electronic controls, synchronizers, ProPilot, and control-system support.
Open resourceABT-TRAC and Wesmar auxiliary propulsion architecture spanning hydraulics, controls, power, and mechanical interfaces.
Open resourceCompare water demand, output, power, tankage, and operating pattern before technical review.
Open resourceNarrow pump type and capacity by application, flow, pressure, power, and installation constraints.
Open resourceDivision FAQ
AMS Systems covers watermakers, freshwater and wastewater plumbing, tanks, pumps, valves, heaters, treatment, CableMaster, HoseMaster, Glendinning electronic controls and synchronizers, system selection tools, and multi-system refit planning.
Daily water demand, number of people, cruising area, available power, generator use, tank capacity, installation space, intake/discharge access, desired run time, water temperature, salinity, and maintenance expectations all affect selection.
Yes. Accumar installs and services multiple Glendinning product families, including Cablemaster shore-power cable systems, Complete Controls electronic engine controls, Automatic Synchronizers, Hosemaster equipment, and ProPilot-related systems, subject to model, documentation, parts, and project scope.
Possible causes include a leak, failing check valve, pressure-switch problem, accumulator issue, air, fixture seepage, plumbing restriction, or pump wear. The complete pressure side should be inspected rather than replacing the pump automatically.
Yes. The Systems division can help sequence equipment selection, access, plumbing, wiring, controls, space, service clearances, testing, documentation, and supporting work from other AMS divisions.
Send a better service brief
Planned maintenance
Watermakers, pumps, plumbing, cable-handling equipment, and controls fail less unpredictably when filters, preservation, leaks, pressure, current, valves, hoses, sensors, and operating cycles are reviewed on schedule.
Review maintenance programsProject gallery
Selected Accumar field photos showing installed equipment, machinery-space access, system controls, and service conditions aboard working vessels.
AMS Systems covers watermakers, freshwater and wastewater plumbing, tanks, pumps, valves, heaters, treatment, CableMaster, HoseMaster, Glendinning electronic controls and synchronizers, system selection tools, and multi-system refit planning.
Daily water demand, number of people, cruising area, available power, generator use, tank capacity, installation space, intake/discharge access, desired run time, water temperature, salinity, and maintenance expectations all affect selection.
Yes. Accumar installs and services multiple Glendinning product families, including Cablemaster shore-power cable systems, Complete Controls electronic engine controls, Automatic Synchronizers, Hosemaster equipment, and ProPilot-related systems, subject to model, documentation, parts, and project scope.
Possible causes include a leak, failing check valve, pressure-switch problem, accumulator issue, air, fixture seepage, plumbing restriction, or pump wear. The complete pressure side should be inspected rather than replacing the pump automatically.
Yes. The Systems division can help sequence equipment selection, access, plumbing, wiring, controls, space, service clearances, testing, documentation, and supporting work from other AMS divisions.
Cross-division support
Accumar Marine Services
Heavy marine motion systems, diagnosed and restored with precision.
AMS Hydraulics provides mobile SWFL marine hydraulic service for the systems that move, steer, stabilize, lift, and position a vessel—from helm input to final actuator.
Accumar Marine Services
Dedicated fin and gyro stabilizer service—from the controller to the hull interface.
AMS Stabilizers provides focused diagnosis, repair, maintenance, installation support, and commissioning for marine fin and gyro stabilization systems across Southwest Florida.
Accumar Marine Services
Engineered comfort and cold-chain performance for demanding vessels.
Marine air conditioning and refrigeration under one specialized division—from Dometic equipment and factory parts sales to installation, diagnostics, chilled-water plants, and custom freezer systems.
Accumar Marine Services
Rigging integrity, sail-handling performance, and deck-level precision.
Custom standing and running rigging, wire fabrication, swaging, rope splicing, furling systems, mast work, inspections, tuning, and charter-vessel support.
Accumar Marine Services
Propulsion and onboard power service built around real diagnostics.
Diesel engines, gasoline outboards, transmissions, cooling systems, and marine generators organized under one accountable mechanical division.
Accumar Marine Services
Clean power, reliable networks, and electronics that work as one system.
Marine AC/DC electrical, batteries, charging, navigation electronics, monitoring, lighting, and vessel data networks under one integrated technical division.
Start with the system—not a guess
We will route the request to the right technical division and coordinate any supporting disciplines through Accumar Marine Services.