Authorized dealer & service
Stabilizers, hydraulic thrusters, steering-related systems, controls, components, diagnostics, installation, and service support.
Accumar Marine ServicesAMS Hydraulics
A division of Accumar Marine Services
Pressure. Control. Motion.
SWFL Marine Hydraulic Service
Heavy marine motion systems, diagnosed and restored with precision.
AMS Hydraulics provides mobile SWFL marine hydraulic service for the systems that move, steer, stabilize, lift, and position a vessel—from helm input to final actuator.
Real Accumar field work: integrated hydraulic machinery aboard a working vessel.
30+ Years
Marine systems experience
Pressure + flow
System-level diagnostics
Documented
Findings and repair scope
Dockside
Mobile Southwest Florida service
Division scope
Specialized service. One accountable team.
Every service below remains part of Accumar Marine Services. The division structure makes expertise easier to find while preserving one company, one service standard, and one point of accountability.
Stabilizers
Diagnostics, service, hydraulic repair, controls, fins, actuators, and commissioning.
Explore service
Thrusters
Hydraulic and electric bow/stern thruster troubleshooting, controls, drives, and installation.
Explore service
Marine & Boat Steering
Helm pumps, cylinders, rams, hoses, reservoirs, power steering, full rebuilds, reseals, bleeding, and pressure testing.
Explore service
Davits, Cranes & Lifts
Power units, cylinders, valves, remotes, limits, load movement, platforms, and leak repair.
Explore servicePasserelles & Powered Access
Gangways, hatches, stern doors, swim platforms, deployment, controls, and safety interlocks.
Explore service
PTO Pumps & Power Units
PTO-driven pump service and rebuilds, electric pumps, clutches, reservoirs, heat exchangers, filtration, controls, and load-demand integration.
Explore service
Full Pump & Cylinder Rebuilds
Cylinders, actuators, pumps, motors, and power-unit components disassembled, inspected, measured, resealed, rebuilt, and tested.
Explore service
Counterbalance Valves & Control Spools
Counterbalance, check and relief valves, control spools, manifolds, accumulators, internal leakage diagnosis, and pressure and flow testing.
Explore serviceHoses, Fluid, Filtration & Cooling
Hydraulic hose replacement, specification, fittings, leak tracing, contamination control, hydraulic heat exchangers, filters, and fluid condition.
Explore service
Hydraulic System Design & Refit
System architecture, load and flow requirements, component selection, hose routing, controls, installation, and commissioning.
Explore serviceTechnical capabilities
Built for diagnosis—not parts roulette.
Pressure, flow, and temperature diagnostics
Full cylinder and pump rebuilds
Complete pump and cylinder reseals
Counterbalance-valve and control-spool service
PTO-driven pump and power-unit service
Hydraulic heat-exchanger service
Hydraulic hose replacement
System design and refit
Control and interlock troubleshooting
System commissioning and sea trials
Brand familiarity
Multi-brand service without the dealership tunnel vision.
We work across established marine manufacturers, coordinate factory support where available, and evaluate the complete system before recommending equipment.
Side-PowerHyproSeaStar
Manufacturer names and logos belong to their respective owners. Dealer or service authorization applies only where specifically stated on this page.
Mobile division service across Southwest Florida:
Authorized Southwest Florida support
Authorized dealer. Authorized service. One accountable team.
Accumar Marine Services is an authorized dealer and authorized service provider for Wesmar, ABT-TRAC, and Naiad Dynamics in Southwest Florida.
Authorized dealer & service
TRAC stabilizers, hydraulic and electric thrusters, TRACLink controls, actuators, power systems, diagnostics, installation, and service.
Authorized dealer & service
Marine stabilizers, hydraulic actuation, controls, power-unit interfaces, component service, troubleshooting, and planned maintenance.
Additional systems serviced
Besenzoni boarding and access systems
We service Besenzoni passerelles, boarding stairs, drive equipment, controls, and related onboard access-system components. This service statement does not represent a factory-authorization claim.
Manufacturer names, marks, and representative product images belong to their respective owners. Authorization is stated only for Wesmar, ABT-TRAC, and Naiad Dynamics.
Systems matrix
One division for the complete hydraulic chain.
A failed actuator may be the symptom, not the cause. AMS Hydraulics evaluates power generation, conditioning, control, actuation, mechanical load, and operating logic as one system.
Motion and control
Systems that stabilize, steer, and position the vessel under real operating load.
Fin and zero-speed stabilizer hydraulic interfaces
Bow and stern thrusters
Hydraulic steering and rudder actuation
Autopilot pumps and steering interfaces
Control heads, sensors, alarms, and interlocks
Deck, lifting, and access
Powered equipment where hydraulic integrity, limits, and safe operation must work together.
Davits and tender cranes
Passerelles and gangways
Swim platforms and boarding systems
Garage doors, hatches, and stern doors
Windlasses, capstans, and powered deck equipment
Power and actuation
The components that create, condition, direct, cool, and convert hydraulic power.
PTO-driven pumps and electric power units
Full pump rebuilds, motors, and reservoirs
Full cylinder rebuilds, rams, and actuators
Counterbalance valves, control spools, manifolds, and accumulators
Hydraulic heat exchangers and coolers
Hoses, fittings, filtration, and fluid condition
Technical work
A defined process from fault capture through rebuild, system design, commissioning, and maintenance planning.
Pressure, flow, temperature, load, and leak testing
Complete pump and cylinder reseals
Full pump and cylinder rebuilds
Hydraulic hose replacement and routing
System design, refit, and component selection
Control calibration and commissioning
Written findings and service-history documentation
How the division works
Measure first. Repair the cause. Verify the result.
The process follows the complete vessel system—not a single component in isolation. That reduces unnecessary parts replacement and creates a cleaner service record for the next decision.
Define the operating fault
We document the symptom, load, temperature, direction of travel, control state, service history, and any recent work before opening the system.
Test pressure, flow, and control
The diagnosis follows the complete chain—from power unit and filtration through valves, controls, hoses, actuators, and mechanical load.
Repair or rebuild the failed cause
Work may include full cylinder or pump rebuilds, complete reseals, hose replacement, counterbalance valves, control spools, PTO-driven pumps, hydraulic heat exchangers, electrical interlocks, calibration, or complete system refit.
Commission and document
The repaired system is checked under realistic operating conditions, with findings and follow-up maintenance recorded for the vessel.
Field evidence
Real Accumar work. Specific systems. Useful context.
Project images are shown with factual captions so owners, captains, engineers, and yards can understand the type of work behind the service claim.
Integrated hydraulics
Installed hydraulic machinery
Pumps, manifolds, hoses, and mechanical interfaces evaluated together inside the vessel—not as isolated parts.
View related serviceStabilizers
Stabilizer actuator service
The installed cylinder, linkage, hoses, fasteners, and surrounding access are visible for system-level inspection.
View related serviceDavits and cranes
Davit manifold diagnostics
Clearly labeled boom and cable circuits support methodical valve, control, flow, and operating-function diagnosis.
View related serviceGuides and next steps
Continue with the right technical path.
Use a focused service page, project example, planning tool, or service request instead of searching through a generic list.
Stabilizer & thruster service
Brand coverage, comparison guidance, maintenance, FAQs, and real Accumar project images.
Open resourceMarine hydraulic repair
Full cylinder and pump rebuilds, complete reseals, counterbalance valves, control spools, PTO pumps, hydraulic heat exchangers, hoses, diagnostics, and system design.
Open resourceGet-home drive systems
ABT-TRAC and Wesmar auxiliary propulsion installation, service, repair, controls, and commissioning.
Open resourceHydraulic repair project gallery
Review authentic valve, cylinder, steering, shaft, seal, and manifold service evidence.
Open resourceRequest hydraulic service
Send vessel, system, fault, access, location, photos, and urgency for technical routing.
Open resourceDivision FAQ
Questions technical customers ask before the first visit.
Which onboard hydraulic systems and components does AMS Hydraulics service?+
The division covers stabilizers, hydraulic and electric thrusters, steering, PTO-driven and electric power units, davits, cranes, passerelles, swim platforms, full cylinder and pump rebuilds, complete reseals, counterbalance valves, control spools, manifolds, hoses, hydraulic heat exchangers, motors, filtration, cooling, and control interfaces.
Is Accumar authorized for Wesmar, Naiad Dynamics, and ABT-TRAC systems?+
Yes. Accumar Marine Services is an authorized dealer and authorized service provider for Wesmar, Naiad Dynamics, and ABT-TRAC in Southwest Florida. We also service other established marine hydraulic brands, including Besenzoni systems, without implying authorization where it has not been specifically stated.
Can a hydraulic leak be diagnosed at the dock?+
Many leaks, pressure losses, steering faults, control issues, and power-unit problems can be evaluated dockside. Fin, thruster, running-gear, load-test, or underwater work may require a haul-out or yard coordination.
What information helps you diagnose a stabilizer or thruster problem?+
Provide vessel make and model, system brand and model, controller messages, when the fault occurs, recent repairs, fluid condition, photos, and whether the vessel is afloat or hauled. This shortens the first diagnostic visit.
Do you offer preventive hydraulic maintenance?+
Yes. A planned scope can include fluid and filter condition, leak inspection, hoses and fittings, reservoirs, coolers, cylinders, mechanical linkages, control operation, alarms, and operating tests based on the installed equipment.
Does AMS perform full marine hydraulic pump and cylinder rebuilds and complete reseals?+
Yes. The scope can include complete disassembly, cleaning, inspection, measurement, seal replacement, controlled reassembly, and testing of cylinders, steering rams, actuators, pumps, motors, valves, and power-unit components. We maintain marine hydraulic service seals and source model-specific seal kits when required.
Does AMS service counterbalance valves, control spools, hydraulic heat exchangers, and PTO-driven pumps?+
Yes. We troubleshoot and service counterbalance valves, control spools and valve sections, hydraulic oil coolers and heat exchangers, and PTO-driven pumps as part of the complete hydraulic circuit. Testing may include pressure, flow, temperature, load, control, contamination, and connected-actuator checks.
Can AMS replace hydraulic hoses or design a complete marine hydraulic system?+
Yes. We can identify hose requirements, replace failed or aging hose assemblies, correct routing and protection issues, and plan complete hydraulic systems or refits around operating load, pressure, flow, controls, cooling, filtration, access, and commissioning.
Send a better service brief
The right details shorten the first diagnostic visit.
Vessel make, model, length, and location
System manufacturer, model, and controller messages
Operating symptom, direction, load, and when it occurs
Photos, prior findings, fluid history, and urgency
Planned maintenance
Protect high-consequence motion systems before they stop the vessel.
Hydraulic steering, stabilizers, thrusters, lifting equipment, and access systems benefit from scheduled inspection, fluid control, filtration, leak detection, and operating tests—not failure-only service.
Review maintenance programsProject gallery
Real systems. Real vessel access.
Selected Accumar field photos showing installed equipment, machinery-space access, system controls, and service conditions aboard working vessels.
Common Questions
AMS Hydraulics Questions — Southwest Florida
Which onboard hydraulic systems and components does AMS Hydraulics service?
The division covers stabilizers, hydraulic and electric thrusters, steering, PTO-driven and electric power units, davits, cranes, passerelles, swim platforms, full cylinder and pump rebuilds, complete reseals, counterbalance valves, control spools, manifolds, hoses, hydraulic heat exchangers, motors, filtration, cooling, and control interfaces.
Is Accumar authorized for Wesmar, Naiad Dynamics, and ABT-TRAC systems?
Yes. Accumar Marine Services is an authorized dealer and authorized service provider for Wesmar, Naiad Dynamics, and ABT-TRAC in Southwest Florida. We also service other established marine hydraulic brands, including Besenzoni systems, without implying authorization where it has not been specifically stated.
Can a hydraulic leak be diagnosed at the dock?
Many leaks, pressure losses, steering faults, control issues, and power-unit problems can be evaluated dockside. Fin, thruster, running-gear, load-test, or underwater work may require a haul-out or yard coordination.
What information helps you diagnose a stabilizer or thruster problem?
Provide vessel make and model, system brand and model, controller messages, when the fault occurs, recent repairs, fluid condition, photos, and whether the vessel is afloat or hauled. This shortens the first diagnostic visit.
Do you offer preventive hydraulic maintenance?
Yes. A planned scope can include fluid and filter condition, leak inspection, hoses and fittings, reservoirs, coolers, cylinders, mechanical linkages, control operation, alarms, and operating tests based on the installed equipment.
Does AMS perform full marine hydraulic pump and cylinder rebuilds and complete reseals?
Yes. The scope can include complete disassembly, cleaning, inspection, measurement, seal replacement, controlled reassembly, and testing of cylinders, steering rams, actuators, pumps, motors, valves, and power-unit components. We maintain marine hydraulic service seals and source model-specific seal kits when required.
Does AMS service counterbalance valves, control spools, hydraulic heat exchangers, and PTO-driven pumps?
Yes. We troubleshoot and service counterbalance valves, control spools and valve sections, hydraulic oil coolers and heat exchangers, and PTO-driven pumps as part of the complete hydraulic circuit. Testing may include pressure, flow, temperature, load, control, contamination, and connected-actuator checks.
Can AMS replace hydraulic hoses or design a complete marine hydraulic system?
Yes. We can identify hose requirements, replace failed or aging hose assemblies, correct routing and protection issues, and plan complete hydraulic systems or refits around operating load, pressure, flow, controls, cooling, filtration, access, and commissioning.
Cross-division support
When one fault crosses multiple systems, we keep it under one roof.
Accumar Marine Services
AMS Stabilizers
Dedicated fin and gyro stabilizer service—from the controller to the hull interface.
AMS Stabilizers provides focused diagnosis, repair, maintenance, installation support, and commissioning for marine fin and gyro stabilization systems across Southwest Florida.
Fin Stabilizer SystemsGyro Stabilizer SystemsActuators, Shafts & Seals
Fin, gyro, controls, and actuationEnter division
Accumar Marine Services
AMS HVAC
Engineered comfort and cold-chain performance for demanding vessels.
Marine air conditioning and refrigeration under one specialized division—from Dometic equipment and factory parts sales to installation, diagnostics, chilled-water plants, and custom freezer systems.
Dometic AC Sales & ServiceMarine RefrigerationChilled-Water Systems
A/C and refrigeration specialistsEnter division
Accumar Marine Services
AMS Rigging
Rigging integrity, sail-handling performance, and deck-level precision.
Custom standing and running rigging, wire fabrication, swaging, rope splicing, furling systems, mast work, inspections, tuning, and charter-vessel support.
Custom Standing RiggingRunning Rigging & SplicingFurling & Backstay Systems
Complete sailboat rigging scopeEnter division
Accumar Marine Services
AMS Mechanical
Propulsion and onboard power service built around real diagnostics.
Diesel engines, gasoline outboards, transmissions, cooling systems, and marine generators organized under one accountable mechanical division.
Marine Diesel EnginesOutboard EnginesMarine Generators
Propulsion and generator serviceEnter division
Accumar Marine Services
AMS Electrical & Electronics
Clean power, reliable networks, and electronics that work as one system.
Marine AC/DC electrical, batteries, charging, navigation electronics, monitoring, lighting, and vessel data networks under one integrated technical division.
Marine ElectricalNavigation ElectronicsBatteries & Charging
Power and vessel intelligenceEnter division
Accumar Marine Services
AMS Systems
The essential vessel systems between the engine room and the living spaces.
Watermakers, pumps, plumbing, shore-service equipment, Glendinning products, and multi-system integration organized for maintainability and long-term reliability.
Marine WatermakersGlendinning ProductsMarine Pumps
Integrated onboard support systemsEnter division
Start with the system—not a guess
Talk with AMS Hydraulics about the vessel, symptoms, and operating history.
We will route the request to the right technical division and coordinate any supporting disciplines through Accumar Marine Services.